The acid mist processing technology and equipment is mainly used to remove the dust, mist, water droplets, aerosol, tar, PM2.5 and other harmful substances in the wet gas, and it is also the ideal dust removal equipment for the control of atmospheric dust pollution. It can be widely used in electric power, metallurgy, chemical industry, boiler, waste in cineration industry, etc. The flue gas emission standards of this equipment is better than Chinese national standard.
The acid mist processoris made ofcarbon fiber products, with the advantages of good conductivity, light weight, corrosion resistance, flame retardant, stable performance, high efficiency.
Parametersselection tableofthe acid mist processor |
Model |
TSDSC -32 |
TSDSC -48 |
TSDSC -82 |
TSDSC -100 |
TSDSC -120 |
TSDSC -140 |
TSDSC -160 |
Capacity of wind (m3/h) |
6900 |
11160 |
17800 |
22300 |
26700 |
31200 |
35700 |
Electric field wind speed(m/s) |
0.5-0.8 |
Effective dust collecting area(m2) |
217 |
325 |
556 |
678 |
814 |
950 |
1085 |
Effective dust collecting area,material |
∅360 inscribehexagon,new conductive glass steel |
The number of honeycomb tube |
32 |
48 |
82 |
100 |
120 |
140 |
160 |
System resistance (Pa) |
300-500 |
System negative pressure (Pa) |
5000-17000 |
Effective electric fieldheight (MM) |
6000 |
High-voltageresourceKV/MA |
80/100 |
80/200 |
80/250 |
80/300 |
80/400 |
80/500 |
80/500 |